型号：3BHB004661R0101 KUC711AE101 

中文产品介绍：

　　概述 / 特点

　　3BHB004661R0101 KUC711AE101 是符合PCI Express规范的数据采集(DAQ)设备，具有高速、高精度、多通道模拟输入功能。除了模拟输入，这个多功能设备还配备了模拟输出、数字输入/输出和计数器，能够在紧凑、价格合理的封装中实现测量控制，满足需要多种信号输入和输出的系统要求。总线主传输功能还允许在长时间内进行连续采样，而不影响设备的最大转换速度。这使得该产品成为需要在长时间内进行高速数据采集的组件检查设备和测量测试台的理想选择。此外，由于事件控制器能够对触发、时钟进行硬件级别集成管理，以及每个信号输入/输出的状态，同步信号输入/输出控制在软件级别难以实现——这是可能的。结果，该产品非常适合需要低延迟、实时响应能力的工厂自动化和混合信号测试应用。

　　高性能、多功能单通道数据采集设备，具有模拟和数字输入/输出及计数器功能

　　除了32通道(12位，10微秒/通道)的模拟输入之外，这款高性能多功能设备还配备了2通道(12位，6微秒)的模拟输出、16个数字输入和输出，以及2个计数器通道(32位)，能够为需要各种信号输入和输出的系统提供紧凑且价格合理的测量控制。

　　3BHB004661R0101 KUC711AE101 采用并改进了Analog E系列的功能，兼容Analog F系列

　　Analog G系列是为取代畅销的Analog E系列而设计的，后者长期以来一直被认为是基于PC的高性能模拟测量设备的支柱产品。使用转换电缆(DT-G2E-16/DT-G2E-32)还可以使连接器引脚分配与Analog E系列相同，允许在不进行任何修改的情况下使用Analog E系列的配件和用户设计资产。

英文产品介绍：

3BHB004661R0101 KUC711AE101 is a data acquisition (DAQ) device that complies with the PCI Express specification and has high-speed, high-precision, multi-channel analog input capabilities. In addition to analog input, this multifunctional device is also equipped with analog output, digital input/output, and counter, which can achieve measurement control in a compact and affordable package, meeting the system requirements that require multiple signal inputs and outputs. The bus master transmission function also allows for continuous sampling over a long period of time without affecting the maximum conversion speed of the device. This makes the product an ideal choice for component inspection equipment and measurement test benches that require high-speed data acquisition over a long period of time. In addition, due to the hardware level integrated management of triggers and clocks by event controllers, as well as the status of each signal input/output, synchronous signal input/output control is difficult to achieve at the software level - this is possible. As a result, this product is highly suitable for factory automation and mixed signal testing applications that require low latency and real-time response capabilities.

High performance, multifunctional single channel data acquisition device with analog and digital input/output and counter functions

In addition to a 32 channel (12 bit, 10 microseconds/channel) analog input, this high-performance multifunctional device is also equipped with a 2-channel (12 bit, 6 microseconds) analog output, 16 digital inputs and outputs, and 2 counter channels (32 bit), providing compact and affordable measurement control for systems that require various signal inputs and outputs.

3BHB004661R0101 KUC711AE101 adopts and improves the functions of Analog E series, compatible with Analog F series

The Analog G series is designed to replace the popular Analog E series, which has long been considered the backbone product of high-performance analog measurement devices based on PCs. The use of conversion cables (DT-G2E-16/DT-G2E-32) can also make the connector pin allocation the same as the Analog E series, allowing the use of Analog E series accessories and user design assets without any modifications