型号：GE   UCSC H1 IS420UCSCH1A-B

中文产品介绍：

　UCSC H1 IS420UCSCH1A-B通常使用加速度计来周期性地记录机器每个径向轴承和轴向轴承的振动水平，通常每月或每季度一次。它不使用瞬态数据(启动和关闭数据)，并且最好配有振动开关(电气或机械)，这有助于在每次周期性数据采集之间防止机器故障。

　　2. 行走振动数据采集(带波形或瞬态数据)

　　这通常在确认问题后进行，特别是在巡检数据收集过程中发现问题时，或者如果振动开关使机器停止运行时。

　　3. UCSC H1 IS420UCSCH1A-B连续振动监测(不包括波形或瞬态数据)

　　这些监测系统通常配备有报警和停机功能，以帮助防止机器故障。这种类型的监测使用直接连接到控制系统提供4到20毫安(mA)信号的传感器来监测振动数据。

　　4. UCSC H1 IS420UCSCH1A-B连续振动监测(与工艺数据相关联，不包括波形或瞬态数据)

　　这个监测概念包含了警报和停车功能，有助于防止机器故障并识别异常趋势。数据通过直接连接到控制系统的4到20 mA变送器发送，并已连接到“工厂信息网络”，以便与过程信息(负载、流量、液位、压力、温度等)相关联。振动数据与过程数据结合，提供了对机器实际表现的更深入理解。

　　5. UCSC H1 IS420UCSCH1A-B连续振动监测(与工艺数据相关联)

　　单通道或多通道监测设备，具有报警和停车功能，有助于防止机器故障并轻松识别振动趋势。只有在拥有正确的传感器套件时，这种监测类型还可以让您对机器进行诊断。振动、速度、推力位置和冲击数据通常包含在数据套件中。

英文产品介绍：

UCSC H1 IS420UCSCH1A-B typically uses accelerometers to periodically record the vibration levels of each radial and axial bearing of the machine, typically once a month or quarter. It does not use transient data (startup and shutdown data) and is preferably equipped with vibration switches (electrical or mechanical), which helps prevent machine failures between each periodic data acquisition.

2. Walking vibration data acquisition (with waveform or transient data)

This is usually done after confirming the issue, especially when problems are discovered during the inspection data collection process, or if the vibration switch causes the machine to stop running.

3. UCSC H1 IS420UCSCH1A-B continuous vibration monitoring (excluding waveform or transient data)

These monitoring systems are typically equipped with alarm and shutdown functions to help prevent machine malfunctions. This type of monitoring uses sensors directly connected to the control system to provide a 4 to 20 milliampere (mA) signal for monitoring vibration data.

4. UCSC H1 IS420UCSCH1A-B continuous vibration monitoring (associated with process data, excluding waveform or transient data)

This monitoring concept includes alarm and parking functions, which help prevent machine malfunctions and identify abnormal trends. The data is sent through a 4 to 20 mA transmitter directly connected to the control system and has been linked to the 'Factory Information Network' for association with process information such as load, flow rate, liquid level, pressure, temperature, etc. The combination of vibration data and process data provides a deeper understanding of the actual performance of the machine.

5. UCSC H1 IS420UCSCH1A-B continuous vibration monitoring (associated with process data)

Single channel or multi-channel monitoring equipment with alarm and parking functions helps prevent machine failures and easily identify vibration trends. Only with the correct sensor kit can this monitoring type still allow you to diagnose the machine. Vibration, velocity, thrust position, and impact data are typically included in the data suite